Repair grease, 12 ml

• When using a grease gun: Inject grease into the unit through the grease nipple until it appears from the gaps of the lubricated joint
• When using an aerosol can: Spray onto the part after cleaning it from contaminants
• Manual application: Fill 1/2 of the free volume of the bearing (unit) with grease after removing the old grease
• To restore the performance of constant velocity joints (CV joints), replace the old grease with XADO Repair grease*

*Remove the protective boot, remove the old grease, disassemble the CV joint, and disassemble it, marking the relative position of all parts. Clean the parts (it is recommended to use XADO Universal Industrial Cleaner or VERYLUBE Conveyor Cleaner). Reassemble the CV joint, observing the relative position of the parts according to the marks. Completely fill the internal cavity of the CV joint with grease, install the protective boot, and put the CV joint back in place. Operate the vehicle until the defect is eliminated (disappearance of extraneous sounds during movement), but for no more than 5,000 km. After that, replace the XADO Repair grease with XADO grease for CV joints or the standard one. If the wear of the treated CV joint was significant, additional noise is possible during the first kilometers of operation. It is recommended to choose a driving mode where this noise is maximum, for example, on turns.